Auspit 3 Way Thowdown With Jonnie Rotisserie, Rhett and Chris!
- Thread starter SmokinAussie
- Start date
Thanks to those who watched the video's. I can't tell who, but I got 16 hits on the first one, and down to 2 on the last one.
I hope this sells a few more Auspit Rotisseries!
Cheeers!
Bill
B
I hope this sells a few more Auspit Rotisseries!
Cheeers!
Bill
B
Clayfish
Full Fledged Farker
Looks like a great time with great food!
swamprb
somebody shut me the fark up.
Johnny R is a man on a mission! AWESOME thread, thanks for sharing!
Jonny Rotisserie
Full Fledged Farker
Thanks Bill for such a great post! I feel almost as if I was there.
That was a fun, delicious evening. Hope to share more like it with you in the future!
--Jonny Rotisserie
That was a fun, delicious evening. Hope to share more like it with you in the future!
--Jonny Rotisserie
That is absolutely EPIC! Thanks for sharing this, Bill.
Very nice Bill Great Presentation
Jonny Rotisserie
Full Fledged Farker
Dr. KY, the length on the Spitmate Jr. should be the perfect size. The issue I can see is the spit shape/width on the Carson. I did not measure it, but on the one Carson I saw, the spit had a blade shape to it which looked to be wider than the 12mm/half inch hole in the Spitmate collar.
There is a Spitmate Kit in Australia which includes a shortened Auspit spit bar and extra Carrier Bracket housing, motor, etc. designed so you can use a Spitmate on a separate spit at the same time while the main spit is working the meats. I have not tried the spit bar to see if it would work on the Carson setup, but if it does and if there is enough interest, we could see about making those spits available on their own.
Looking at pictures, it appears the blade shape continues into the motor interface instead of a standard square interface, so I have my doubts that would work either.
Any ideas?
--Jonny Rotisserie
leanza
Babbling Farker
Most Excellent presentation. I felt like I was there with you.
