THE BBQ BRETHREN FORUMS

Welcome to The BBQ Brethren Community. Register a free account today to become a member and see all our content. Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

fireman_pete

Full Fledged Farker
Joined
Nov 28, 2007
Location
Temecula, CA
Hi Guys,

We have been invited to participate at a couple of local farmers markets. The issues is that our current BBQ trailer is too big. SO, I am thinking of designing and building a smaller cart type set-up to use at the markets.

Think of a hot dog cart/trailer but with a small smoker. I am looking at using a Traeger for the smoker, and then add a small sink, maybe 1-2 steam tables, storage, etc.

Has anyone made anything like this?

If so, I would love to see some pics.

It would need to be fairly self contained, and portable/moveable by hand.

Thanks

Pete
 
Kyle built a cart for our FEC 100
It is steered by a Harbor Freight trailer dolly
Back wheels are 12 inch also
He built racks for full pans near the exhaust exit
Warn enough to hold meat
I will post a pic if you want
 
Thanks Thom, yes I would love to see some pics.

Thanks!


Kyle built a cart for our FEC 100
It is steered by a Harbor Freight trailer dolly
Back wheels are 12 inch also
He built racks for full pans near the exhaust exit
Warn enough to hold meat
I will post a pic if you want
 
farmers market set up

I am now in my 7th week doing a small market here in Ventura, let me say, its not all that easy to get all the EHD things in place. First, with the " small sink", you (at least here in Ventura cty) need a 3 compartment sink, a seperate hand wash sink, at least 30 gal of potable water, and a waste tank 1 1/2 times that ( 45 gal). Food has to be kept at min of 135, and a cambro is not allowed to keep things warm, its only for transportation, you need a full screen house around the e-z up, all coolers have to be 6 in off the ground, all meat has to be seperate, chicken, beef, pork, none together. There is a lot more, hope I didnt discourage you, it can be done, but what a royal pain. I have pics of our set up if you'd like, let me know.
 
Thanks. I have done our farmers markets here in Riverside County off and on for a few years, so well aware of the HD requirements. Luckily they are easier than ventura. For handwash, we can use a drink cooler with warm water, and they are happy. For 3 compartments, we use plastic bus tubs. We cannot hold hot food in cambros, but we use steam tables/chaffing pans. We also have to use the screened in room, and all food must be prepped and cooked on-site.

Would love to see pics of your set-up.

Thanks

Pete


I am now in my 7th week doing a small market here in Ventura, let me say, its not all that easy to get all the EHD things in place. First, with the " small sink", you (at least here in Ventura cty) need a 3 compartment sink, a seperate hand wash sink, at least 30 gal of potable water, and a waste tank 1 1/2 times that ( 45 gal). Food has to be kept at min of 135, and a cambro is not allowed to keep things warm, its only for transportation, you need a full screen house around the e-z up, all coolers have to be 6 in off the ground, all meat has to be seperate, chicken, beef, pork, none together. There is a lot more, hope I didnt discourage you, it can be done, but what a royal pain. I have pics of our set up if you'd like, let me know.
 
Have you checked this guy out? I stopped by his shop in Riverside a couple of weeks ago and he was building a bigger version of what you were looking for. He's not far from you and may have some ideas you can use.

Disclainmer: I have zero knowledge of this guy, his quality of work or his business dealings. I get nothing out of this ~ just thought I'd pass some info along to possibly help.

http://www.fatboyshardcorebbqs.com/
 
Thanks for the info. Just an FYI, I know a few folks who have bought pits from this guy and they were LESS than happy. I have not seem them first hand, but just letting you know what I heard.

Thanks

Pete



Have you checked this guy out? I stopped by his shop in Riverside a couple of weeks ago and he was building a bigger version of what you were looking for. He's not far from you and may have some ideas you can use.

Disclainmer: I have zero knowledge of this guy, his quality of work or his business dealings. I get nothing out of this ~ just thought I'd pass some info along to possibly help.

http://www.fatboyshardcorebbqs.com/
 
Thanks for the info. Just an FYI, I know a few folks who have bought pits from this guy and they were LESS than happy. I have not seem them first hand, but just letting you know what I heard.

Wow ~ That's good to know. I'd be interested to hear their feed back.

I am a novice on this whole REAL BBQ thing, and I thought some of the things he said about BBQ'ing were off base, but what do I know.

His gallery make it look likes he's built more than a few. I did notice that his welding skills seemed to be lacking, but I wasn't looking at a finished product, so I was giving him them benefit of the doubt, maybe he had plans to go back and tighten things up.

I'll stop there, as I don't want to hi-jack your thread. PM on its way.
 
Back
Top