B
bunchde
Guest
I'm looking to buy a DX2 and wonder if the 10cfm fan that comes standard is sufficient for a 22" WSM or if I should get the upgraded 25cfm fan?
ccarter
Full Fledged Farker
I can run any of my smokers on the 10cfm fan: BWS Party, Large BGE, or 18.5" WSM... I can't imagine that you'd have a problem with the 22" WSM.
DriverWild
is one Smokin' Farker
10cm fan is plenty powerful for a UDS, WSM, BGE etc. If you get into bigger stick burners then you might need to upgrade.
BobM
Babbling Farker
I have a CyberQ WiFi and the 10cfm fan is fine on my 22 1/2" WSM.
K80Shooter
Full Fledged Farker
I have a XL-BGE and a 10cfm fan works great on it.
Cayman1
is one Smokin' Farker
10 cfm fan is fine for my WSM, in fact, I just ordered another Guru DX2 with the very same fan.
I believe the 25 will be way too strong
10cfm is way plenty for a WSM. I run the same fan at 1/3 with my cyberq wifi on my kamado to avoid overshooting temps. You'll be good.
dobdabomb
Full Fledged Farker
Biged92
Knows what a fatty is.
Though I do not have a DigiQ, I do have a Stoker, and I use the 10 cfm fan with my 22.5" WSM. It works great. No need for the for the larger fan.
Fwismoker
somebody shut me the fark up.
Heck i've used my PartyQ on my UDS and it works ok and that's only about 5 cfm.
