eggers answer

Grumpy's Q · Mar 6, 2008

Norcoredneck here are the pictures you requested. I tried to post them in the thread. There was no paper clip to attach pictures with WTF! Here is my egg with the bans and some porn....oh yea and the North Texas weather report.

Norcoredneck · Mar 6, 2008

The reason I asked is I have seen what you posted but not this. When you lift lid it locks/catches. To lower you have to raise lid, push lever down and lower lid.

Smokin Gator · Mar 6, 2008

Yep... the ones that Norco posted are the ones I have. I kinda like 'em.

yelonutz · Mar 6, 2008

Grumpy, you must have a time machine, your pictures are dated April 15, 2053! How'd you do dat??
NUTZ

Norcoredneck · Mar 6, 2008

Smokin Gator said:
Yep... the ones that Norco posted are the ones I have. I kinda like 'em.

What is the deal with this?

swamprb · Mar 6, 2008

I'd replace that in a heartbeat!

Smokin Gator · Mar 6, 2008

Norcoredneck said:
What is the deal with this?

I have no idea... I just went out and looked to make sure, but mine doesn't have anything like that on the band carriage bolts.

Rick's Tropical Delight · Mar 6, 2008

Norcoredneck said:
What is the deal with this?

i'd 'spring' for the new spring assist hinge. :roll:

Kevin · Mar 6, 2008

Quick question for you eggers. I'm going to a dealer this weekend to look. What should I expect to pay retail for a large? Used isn't really an option here in the great white north.

Rick's Tropical Delight · Mar 6, 2008

Kevin said:
Quick question for you eggers. I'm going to a dealer this weekend to look. What should I expect to pay retail for a large? Used isn't really an option here in the great white north.

my guess is over $800

Kevin · Mar 6, 2008

Rick's Tropical Delight said:
my guess is over $800

That's kind of what I thought. Thanks.

Rick's Tropical Delight · Mar 6, 2008

Kevin said:
That's kind of what I thought. Thanks.

call all the nearby dealers. offer them less and then see what they might throw in with it... ash tool, grid lifter, lump, plate setter, egg mates (shelves), egg nest... worth a shot.

Smokin Gator · Mar 6, 2008

I think retail for the large is $699. The nest is about $75. Plate setter about $45.

Kevin · Mar 6, 2008

Rick's Tropical Delight said:
call all the nearby dealers. offer them less and then see what they might throw in with it... ash tool, grid lifter, lump, plate setter, egg mates (shelves), egg nest... worth a shot.

I will do that. No hurry for me, but I am serious about getting one. We have several dealers within 100 miles. A local appliance store is a new dealer and I have bought kitchen appliances from him for years to get local service.

Divemaster · Mar 6, 2008

That's the latch that I have on mine and it is kinda a pain.... It's on the 'replacement list'

Kevin, keep your eyes open on Craigslist... It does happen when you least expect it....

Plowboy · Mar 6, 2008

Smokin Gator said:
I think retail for the large is $699. The nest is about $75. Plate setter about $45.

Bingo. That's about the going rate around here.

thillin · Mar 7, 2008

Kevin said:
I will do that. No hurry for me, but I am serious about getting one. We have several dealers within 100 miles. A local appliance store is a new dealer and I have bought kitchen appliances from him for years to get local service.

Find the nearest Eggfest and get deal on a demo.

thirdeye · Mar 7, 2008

Norcoredneck said:
What is the deal with this?

It's hard to tell from the picture, but does the bolt go through the bracket and fit below the ceramic ridge? It's possible the previous owner had some band slipping problems and designed this fix.

At one time there were some custom clips to stop band slipping on another ceramic cooker.

Divemaster · Mar 7, 2008

thirdeye said:
It's hard to tell from the picture, but does the bolt go through the bracket and fit below the ceramic ridge? It's possible the previous owner had some band slipping problems and designed this fix.

At one time there were some custom clips to stop band slipping on another ceramic cooker.

Good point... I hadn't thought of that...

thillin · Mar 7, 2008

I'm guessing it's the previous owner's home device to keep the dome from closing all the way. With the bolt flipped over the gasket, how much does it hold the dome up? Or homemade utensil holder...

eggers answer

is Blowin Smoke!

Attachments

somebody shut me the fark up.

Babbling Farker

is one Smokin' Farker

somebody shut me the fark up.

somebody shut me the fark up.

Babbling Farker

Rick's Tropical Delight

Guest

Quintessential Chatty Farker

Rick's Tropical Delight

Guest

Quintessential Chatty Farker

Rick's Tropical Delight

Guest

Babbling Farker

Quintessential Chatty Farker

somebody shut me the fark up.

somebody shut me the fark up.

somebody shut me the fark up.

somebody shut me the fark up.

somebody shut me the fark up.

somebody shut me the fark up.

Similar threads