Traeger Cold Smoker

Good question. <bump>

Take a piece of dryer vent tubing and run it into some type of box with a rack in it (I am using an old Little Chief smoker that didn't work and was given to me for free) Then place the dryer vent on the smokestack of the Traeger and run the other end into the smoke box. Depending on conditions you can lengthen the vent tubing to cool the temp inside of your smoke box. I have done lots of smoked cheese like this with GREAT results.

Best bet is to make a cold smoke generator. Fre a few buck you can do that with some aluminum dryer vent tubing and a gallon paint can. the vent tubing can be run to any type of emclosure from a cardboard box to the ash door on a BGE. They have some good plands at NakedWhiz's websites.

I had the cold smoker attachment on my little tex. I could never get it stay cold enough even on the smoke setting unless it was below 0C (32F for you non metric hooligans :boxing

I ended up going the dryer tubing and cardboard box route which worked well.