View Single Post
Old 06-01-2014, 03:05 PM   #1
chuMP
Full Fledged Farker
 
Join Date: 05-19-14
Location: Current - Jacksonville,NC; Hometown - Baton Rouge, LA
Default Vision Classic DIY deflector update

I know this subject is a little old and there are previous threads about it, but availability of items out there has changed, and I thought I'd give the brethren an update. I saw a 15" pizza stone at Home Depot yesterday by Master Forge for $18. That plus a 48" steel strap for $5 got me up and running with a great indirect setup on my Vision Classic for roughly $25. Measured and bent the steel into a recessed bracket shape. The top of the stone sits about 1" below the upper lip of the firebox. Space between the edge of the stone and the inside edge of the firebowl is about one inch. I did a test run last night and it worked very well.
__________________
Weber Summit Platinum D4, Vision Classic Kamado, [COLOR=red]ThermoPop[/COLOR], Maverick ET-733

"Life is hard; it's harder if you're stupid." - John Wayne

"Majority rules don't work in mental institutions" - NoFX

"You can't spell chump without MP" - some dummy in the backseat of my cruiser...

Last edited by chuMP; 06-17-2014 at 03:10 PM..
chuMP is offline   Reply With Quote