2" pipe for exhaust threaded into bung hole..
1" pipe for air intakes...I used a 1.25" hole saw for drilling
3 evenly spaced holes around the bottom of the drum, centered 1.75"
from the bottom, then threaded 1" pipe nipples into the holes and
secured with 1" conduit lock nuts on the outside of the drum.
Attachment 8201
The vertical pipe is 30"s long and keeps an
old fat man from rolling on the ground!!!!
Sheet magnets are available at Craft and Hobby Stores.
As long as they aren't near the heat, they work wonderful!