Peddler
Knows what a fatty is.
Nice shelf. Just don't put any food on the treated lumber. Bad stuff in treated lumber.
I guess it's OK to make picnic tables out of treated lumber but not BarBQ pits...Hmmm???
Nice shelf. Just don't put any food on the treated lumber. Bad stuff in treated lumber.
I'm sure he meant that you shouldn't put food directly on treated lumber like you would with food grade tops. There are some nasty chemicals in treated wood that you really don't want in your food.
I have a question about my exhausts. Will threading the 8 holes in my lid with nipples create any chimney like effect (if that exists), or is it exactly the same as just having the holes bare.
I'm debating whether I should thread the holes with a pipe plug to close it off, or just install the nipples and use caps for cutoff...
hi im new here, need some advice. Ive bought a steel drum (32 inches high, 22 inches diameter). is this too short to convert to a UDS? Also, is it essential to have 24 inches between coal basket and grill grate? Thanks in advance
I have a question about my exhausts. Will threading the 8 holes in my lid with nipples create any chimney like effect (if that exists), or is it exactly the same as just having the holes bare.
I'm debating whether I should thread the holes with a pipe plug to close it off, or just install the nipples and use caps for cutoff...
I'm starting another UDS build and picked up a couple cans of the Kleen Strip and it really works. I didnt want to do a burn out so I used it to strip the paint off and then I had one lid with the tan liner and it worked like a charm. I got most of the paint off the drums although the pics show some spots. 2 cans for 2 drums. Gonna finish the build next weekend.
I picked up a can of Kleen-Strip to test on my dreaded red liner... I'll report and post pix when I do later this week. Glad to know this stuff works so well on the tan and exterior paint.
I'm starting another UDS build and picked up a couple cans of the Kleen Strip and it really works. I didnt want to do a burn out so I used it to strip the paint off and then I had one lid with the tan liner and it worked like a charm. I got most of the paint off the drums although the pics show some spots. 2 cans for 2 drums. Gonna finish the build next weekend.
Wow that was a lot of tabasco sauce!