Norcoredneck
somebody shut me the fark up.
Brian
The fleet! Now if you could only play Reggae music on them you could do
Parties.:biggrin:
Brian
Are you burning off the lining? If so, just start a raging fire in it and let it get as big and hot without setting SoCal ablaze, you could layer/stack the wood in it and if you know where the intakes are going to be drill the holes now before you strike the match and really let the oxygen flow! This is such a PITA that it's almost worth it to find an unlined drum, but hey! after you've done it you'll see what I mean! The object of the UDS is to do it cheap and doing it yourself and I did! The second, third, fourth and waiting in the wings fifth drum are all unlined. UDS#1 is now just a burn barrel, givin it up for progress!
Brian
Too bad your not closer to Seattle, I should go into the UDS business!
http://seattle.craigslist.org/tac/mat/411877798.html
Unlined and pretty too!
Brian
Any chance of seeing the cart you made for your WSM's? I see it behind the UDS's
Thanks
Very nice cart!!
Ask and you shall receive! This was the frame of a Weber Performer.
I'm still working on the cart, have a sheet of stainless steel that will set on the top next to the folding table to use with the right WSM removed, need to cut the contour out and its good to go.
Brian
Ask and you shall receive! This was the frame of a Weber Performer.
I'm still working on the cart, have a sheet of stainless steel that will set on the top next to the folding table to use with the right WSM removed, need to cut the contour out and its good to go.
Brian
Sweet! Are the WSM's secured to the cart in some way? It looks like it might get bouncy if you walk that off pavement.
Ok guys, where is the best place to find that rolling base for the drums?
Thanks!