View Single Post
Old 03-08-2013, 12:25 PM   #16
Babbling Farker

Join Date: 07-11-11
Location: Tuscaloosa Alabama

Standard baffel plate material is usually 1/4"material But... 3/16 will work fine it is defiently not going to burn out on a reverse flow. 1/4" radiates heat a little more. As far as the gap it needs to be at least equal to the square inches of the cutout going into the cook chamber from firebox to keep from interrupting flow in my opinion!!!
TuscaloosaQ is offline   Reply With Quote