Originally Posted by SmokinCoyote
I just used 4 pieces of angle iron and 4 bolts to hold the expanded metal in.
the legs are 1/2" square tubing cut 10 1/2 inches long. I bolted the bottom of each leg in the ash pan with 1 bolt and the top of the leg to the box with 2 bolts each. It would have been easier to weld it together but I still might change some stuff and with it bolted together if I ever need to replace the grate I can just unbolt it and replace it.
Lang 36 custom, Backwoods Patio, Horizon Patriot, UDS by Norco, Spirit E-310