View Single Post
Old 03-28-2014, 09:36 AM   #11807
Found some matches.
sensor's Avatar
Join Date: 02-02-14
Location: Westminster, MD

Originally Posted by gt651 View Post

Yes a very nice build.

Could you say something about the dome you used and did you use an open- head or closed-head drum?
I used a closed-head drum, that I cut top off on the outside just below the bead. I used a thin cut off wheel in a 4 1/2" grinder. i was careful to only cut through 1 layer of metal to be able to use the flat top lid. After I made the cut the weber grill and cart showed up on CL, so I used the lid off of the 22.5" weber grill. The lid needed a gasket, so I bought 1/8" I.D. x 1/4" O.D. Silicone Tubing - High Temp Hose (500F) off of ebay and cut one side to slide onto the drum.
May I have some more please?
sensor is offline   Reply With Quote