View Single Post
Unread 10-27-2013, 12:08 AM   #30
SmittyJonz
Babbling Farker

 
SmittyJonz's Avatar
 
Join Date: 07-17-13
Location: Burleson Tx
Downloads: 0
Uploads: 0
Default

Well drilling 1 1/4 holes in 1/8" plate SUCKS! esp thru Stainless Skin then 1/8" plate then another 1/8" plate an inch in. Using a Step Bit and oil but Burned up my 2 Old Cheapo 3/8" Drills and had to go Buy a REAL Drill - 1/2" Rigid. Then Home Depot doesn't carry 1"x3" pipe nipples and 2" was too Short so I got 4" but they are too long so now I gotta find something to use as spacer behind conduit nuts. So between that and watching GBabys 2 Ballgames I didn't get a lot accomplished today!
UDS was MUCH Easier..........
__________________
N Tx Spring Bash

Last edited by SmittyJonz; 10-27-2013 at 12:26 AM..
SmittyJonz is online now   Reply With Quote