View Single Post
Old 09-28-2013, 07:24 PM   #3
somebody shut me the fark up.
Bludawg's Avatar
Join Date: 07-04-09
Location: Jonesboro,Tx

I moded mine very successfully and my temps are with in 5 deg.
take the CI grates out of the firebox and pull the charcoal pan out of the oven put the CI grates at each end of the oven and put the charcoal pan on top inverted then you need to drill a series of holes starting at the fire box side at 3" from the edge with a 1/4 " bit drill one hole on center line the measure 4" to the left & right and drill those to 1/4" go back to the center line and measure 4" and increase the bit size by 2 sizes and repeat the process continue until you get to 1/2" holes. With the pan butted up to the opening at the firebox the heat will travel under the plate and vent out the sides evenly.

I never met a Cow that I didn't like with a little Salt & Pepper! Certified PORK-A-HOLIC
Bludawg is online now   Reply With Quote

Thanks from:--->