View Single Post
Unread 09-18-2013, 11:56 PM   #39
aaronmhooks
Got Wood.
 
Join Date: 07-29-12
Location: Montgomery, Alabama
Downloads: 0
Uploads: 0
Default

Well we made a lot of progress tonight but I didn't get the barrel painted. I started laying down a base coat but had to weld on the top and on the bottom so those will be painted later. I got 2 of the 3 bolt tabs welded on and one of those drilled through and bolted down. I try not to make alot of noise here after around 9 or 930 so I will have to drill out the second tab tomorrow. I am going to add some angle iron as support for the rear of the trailer and thats where I will put the 3rd tab. That will be the last thing welded to the barrel. All of the welds currently are rough and needed to be sanded down to look pretty. That will all be done tomorrow afternoon. But for now here is some pictures to look at.

Bolt Tab


Hinge











aaronmhooks is offline   Reply With Quote


Thanks from:--->