View Single Post
Old 09-18-2013, 10:32 PM   #11423
Got Wood.
Join Date: 07-17-13
Location: Long Beach, CA
Default Also check your ball valves

Some have very small openings.

Originally Posted by R8ter87 View Post
I am having a heck of a time getting my UDS up to temp.

I have 3 3/4 inch intakes, one is just a straight nipple with a cap and the other 2 have an elbow with a 2 foot pipe and a ball valve.

The intake holes are drilled 3 inches from the bottom.

The lid has 4 3/4 exhaust ports.

My charcoal basket is a Weber 18.5 charcoal grate as a base and 16 gauge expanded metal welded to it.

I added 4 inch tall legs to the bottom of the basket. I have attached a picture of both my barrel and charcoal basket.

I have tried methods such as lighting a few briquettes and adding to the top and letting them burn down.

Also today I light a whole chimney of coal and poured them on the bottom and add the unlit coals to these.

Both of the methods failed to get the temp up after waiting at least a half hour.

My best guess is to eliminate the legs on my basket? I'm baffled anything will help thanks.
Weber Kettle; brinkman ECB (modified) Weber Genesis 2000- Retired :( Mono-Trol UDS; IMBAS Certified MOINK BALLER
HAndyman is offline   Reply With Quote