View Single Post
Old 07-09-2013, 09:33 PM   #58
SmokerKing
is one Smokin' Farker
 
SmokerKing's Avatar
 
Join Date: 09-07-10
Location: Sunny AZ
Default

Quote:
Originally Posted by ironbrew View Post
Wondering what you are using for "lids". You may have mentioned, but I didn't see...
http://turnerbiodiesel.com/8_gallon_55_gallon_drum_cone

It does need modification. The cone top sits directly on top of the rim of the drum.

At the bottom of the cone, you need to spot weld a 1/4" rod around the perimeter. Once that's welded, a 1" x 1/8" flat bar needs spot welded to the rod to capture the lip of the drum.
SmokerKing is offline   Reply With Quote