Originally Posted by Mccaf
Does this look right?
This is per instructions from this thread.
(9) "Router Mode" should be "DHCP and NAT". If it isn't, stop now.
(10) Under "DHCP Reservations", click "+" to add. Specify whatever name
you want for your CyberQ Wifi, enter its MAC address from step 6,
and pick an IPv4 address for DHCP to reserve -- I chose 10.0.1.123.
(11) Under "Port Mapping", click "+" to add. Specify whatever name and
IP address you chose in step 10, and enter 80 for all the ports.
(12) Click "Update", which will power-cycle your Airport so that
all of these settings take effect. Wait for this to complete.
Sorry... I missed this post. Yes, that all looks right. Can you hit the web page of the CyberQ from a device on your local network using 10.0.1.123? That will verify that is it's local address.
What do you get when you try to use the public IP address of your router from a device on the internet?
"Ron Rico, Boss. You can call me Captain Ron..."
The Naked Fatty!
FEC-100/BWS Party/Memphis Pro SS/PBC/LBGE X 2/SBGE/Mini BGE/Nomad Pellet-matic/Good-One Model 42/WSM X 2/Cookshack Smokette 008/Weber Performer/Saber Cast 500/Weber Gasser (RIP)/Weber Kettle X 2/Weber Smokey Joe/WGA/UDS/Coffee Roasting Gasser