View Single Post
Old 03-16-2013, 06:04 PM   #127
is Blowin Smoke!
Pappy's Avatar
Join Date: 05-09-11
Location: Granite City, Illinois (Near St. Louis "GO CARDS")
Default Firebox Hinges - Shelf - Tuning Plates - Axle Cut Off

Huntin Smoke finished cutting the expanded metal to fit and welded it to the shelf frame. Going to cut some 1/8" plate steel for a backsplash, between the smoker and the shelf. The reason the shelf in low, you can slide the bottom rack out without having to move anything that might be in the way.

Firebox Hinges are cut out and all edges ground smooth.

Tuning Plates with handles

Spring shackles cut off the trailer frame. Ready to weld on new shackles further back on the trailer to balance the weight.
22.5 WSM, 120 Gallon Offset, Weber Performer, IQ-110, ET-732
Pappy is offline   Reply With Quote