Originally Posted by DownHomeQue
you could do that.. but if possible consider a Half moon shaped opening.. you will get a better draft that way.. The way you are describing is good also.. but if you are building a traditional offset only.. if you are building a reverse flow.. thats a long route for the smoke to go.. and it may not draft properly without the half moon or rectangular opening..
Half moon opening it shall be. Thanks for the tip. I'll build some sort of door for it also and make sure it's vented. Will a door even be necessary is done as you subscribe?
The cooking chamber is going to be a reverse flow. my measurement were off on my last post. It's an old air tank. 66" x 21" x 3/8" thick