The BBQ BRETHREN FORUMS. - View Single Post

Neonnblack · 02-27-2013, 04:42 PM

Have a piece of 2 inch flat steel rolled to the inside diameter of the drum, then tack weld or bolt it to a piece of sheet metal, like 10 or 12 gauge.

And the basket would be smaller than the 55, so distance wouldn't really mater.

02-27-2013, 04:42 PM	#3
Neonnblack Full Fledged Farker Join Date: 01-15-13 Location: Reno, NV Downloads: 0 Uploads: 0	Have a piece of 2 inch flat steel rolled to the inside diameter of the drum, then tack weld or bolt it to a piece of sheet metal, like 10 or 12 gauge. And the basket would be smaller than the 55, so distance wouldn't really mater.