Quote:
Originally Posted by swamprb
I'm gonna cut to the chase.
What size hole is the intake vent opening and what is the "factory setting?"
I got the rest figured out, the hard part will be scoring a open 30 gallon drum.
|
Intake is like 3". Good luck finding a 30gal drum though. I have a hunch you will have to buy one new from a distributor for $60-$100.
I did have an idea today though. What if you took a 100 gal propane tank, cleaned it out, and built a version of the PBC. You could put it on legs and mount a firebox underneath and the cut a door in the side. Cut some holes to slide some rebar through and BAM! You've got an ugly offset pit tank. UOPT 
__________________
18.5" OTS, 22.5" OTG, CB Silver(Rip), Vintage Coleman Bullet, Pit Barrel, UDS
|