View Single Post
Old 01-10-2013, 12:47 AM   #13
somebody shut me the fark up.

thirdeye's Avatar
Join Date: 01-14-06
Location: At home on the range in Wyoming

Originally Posted by JMSetzler View Post
I used the WSM Adapter on the drum. I drilled a 1" hole about 1.5" above the bottom of the drum and mounted the WSM adatper in that hole with the vent blowing down. The fan I have is the Pit Viper 10cfm and I had been using the DigiQ II DX controller. I can probably snap a photo of that setup if you want to see it....
Yes, when it's convenient. I process information better with a picture. I have the Pit Viper 10 also, and I was concerned about the fan being so close to the ground (like when it snows). I had considered a Z piping arrangement to pick the fan up 4 or 5 inches, just not sure if that is possible.

Big Green Eggs, Big Drum Smokers, Big Chiefs, Weber Smokey Joe "Custom Tall Boy"
Oil Patch Horizontal

Visit my Cookin' Site by clicking HERE
Barbecue is not rocket surgery
thirdeye is offline   Reply With Quote