Quote:
Originally Posted by thirdeye
Would you mind posting or PM'ing me a photo and details of your Guru set-up? I have the old Competitor model, but I'm guessing the mounting hardware is the same.
|
I used the WSM Adapter on the drum. I drilled a 1" hole about 1.5" above the bottom of the drum and mounted the WSM adatper in that hole with the vent blowing down. The fan I have is the Pit Viper 10cfm and I had been using the DigiQ II DX controller. I can probably snap a photo of that setup if you want to see it....