I got a CyberQ WiFi for Christmas, and had problems. I also have an Android phone and can not use adhoc mode. After about 4 hours of playing tonight, I got it to work.
I have a Linksys E4200 v2.0.37 wireless router.
I set the encryption on the CyberQ to "open" and disabled security on my wireless router, and it connected right up. That told me it was an encryption problem.
I then played around with the encryption settings, and finally found a pair that works.
By setting the CyberQ to "WPA2, Phrase" and the router to "WPA2 Personal", I was able to get them to connect right up with the passphrase.
When I restart the unit, it always displays "NO NETWORK" but after about 10 or 15 seconds, it connects up. By going to the "WIFI SETUP" screen, you can find out what IP, DHCP assigned to it. As long as you are connecting to it from your own LAN, further configuration isn't needed, but I'll probably configure the whole thing anyway. I did password protect the user interface though.
"Beer is living proof that God loves us and wants us to be happy." - Benjamin Franklin
| Weber 18 1/2" & 22 1/2" WSM, 22 1/2" & 26 3/4" OTG, Genesis S-330 |
| BBQ Guru CyberQ WiFi | Maverick ET-732 |
Last edited by BobM; 12-28-2012 at 02:11 AM..