Originally Posted by davefan360
yes it is hard cutting a straight line with the grinder. but that is all we have so we make due.
If you don't cut all the way through, make several slow passes when cutting, you can get a pretty good straight cut.
How wide does the strip around the door edge need to be?
We used 1 1/4" flat bar. 5/8" overlap each way.
The headphone type ear protection sells for about $4.00 and they work great.
Performer, UDS, 1983 WSM, Frank-in-Weber, 120 Gallon Offset, IQ-110, ET-732