View Single Post
Old 11-04-2012, 10:30 PM   #10253
Full Fledged Farker
Kloogee's Avatar
Join Date: 09-05-12
Location: Midwest

Originally Posted by krshome View Post
I used 2" attached to the inside of the barrel it stuck up about 1/2" above the lip of the barrel. I then used pop rivets every 4" to attach a 1/2" piece of flat bar to the outside of the 2" flat bar. I used the two clamps and one small pair of vise grips to hold the flat as I worked around the barrel drilling and riveting. If you would like I can take pictures of the 1/2" flat tomorrow. Btw everything was bought at Lowes
I would be interested in pics.
Kloogee is offline   Reply With Quote