Originally Posted by Sizzl
What are the two widths of the flat bar?
Sent from my GS3 via Tapatalk 2
I used 2" attached to the inside of the barrel it stuck up about 1/2" above the lip of the barrel. I then used pop rivets every 4" to attach a 1/2" piece of flat bar to the outside of the 2" flat bar. I used the two clamps and one small pair of vise grips to hold the flat as I worked around the barrel drilling and riveting. If you would like I can take pictures of the 1/2" flat tomorrow. Btw everything was bought at Lowes