Originally Posted by woodpelletsmoker
"SSR output for Fan 12VDC, 1 Amp"
must be constant fan speed, not variable speed.
should be on-off only, but in PID mode, good too.
You are right. I did not state that correctly.
Controller with artificial intelligent enhanced PID control program, It has a bright LED for out door use. It has a built-in buzzer that can be set for both low limit and high limit alarm. Developed by industrial control engineers, this controller utilizes an advanced AI (artificial intelligence) enhanced PID algorithm that can hold the cooking temperature within a tight range and prevent temperature overshooting from disturbance such as opening/closing the pit lid, wind, sun, and ambient temperature drops..
You can program the variables to change the logic although most people say the default values work fine.
Old user name was JP7794
Jim - KCBS CBJ
Porcine Perfection BBQ Team - Follow us on Twitter
18.5" WSM (1983 model) | 18.5" WSM (2010 model) | Packer Green Thermapen
| Auber PID Temp Controller | QMaster Senior Temp Controller | Mini WSM | Green Bay Packer UDS