Originally Posted by jetfxr27
I tied the wires to a 12v cigarette lighter adapter and tried a jump box the first time. Second time a tried a socket adapter.
Both times was a low battery display on the remote and on the PID. I will try a better source. I have an old laptop transformer that I'll give a whirl.
If battery on remote set is 1.45 V, it is TOO LOW.
I measure my new battery is 1.59 V.
In most cases laptop adapter is not big enough.
If you use AC/DC adapter, use 12 VDC 2 amps or bigger amps.
If you use a battery, use 12 VDC 2 A.H or bigger.