Originally Posted by thegizzard
I have the Lion. I know its not too much help, but I would encourage you to be patient. Once you have the product up and running, you will love it.
I have my UDS set at 60. I could not get it to do exactly what the instructions said, but a setting of 60 works just fine for me.
According to the directions when you are setting UDS you are supposed to press the "-" and "+" key until the fan turns on. The issue I'm having is the fan does not turn on anywhere between zero-255. However, the fan motor has gotten hot. Nevertheless, if I turn the controller off and back on the fan starts for about 1 second then quits.
Even though when I follow the directions for setting UDS above the fan does not start while in that set up mode as is suggested it will in the directions I've discovered it starts when I place the controller in manual and while in manual allows me to adjust the fan speed up and down. This leads me to believe that the manual incorrectly indicates that the fan will start when setting UDS.
The second issue I've discovered as it appears the battery I purchased from Ebay is either the incorrect battery or is no good. I double checked with Wang to see if the battery I was choosing would run the unit, but the fan will not run with the battery, but it will work when I plug it into an outlet via an ac/dc adapter.
The following is the description the Ebay Auction gave of the battery I purchased. Should this battery work?
This Rechargeable battery is a 12 V 6800mah Li-ion Battery and it is specially designed for powering the system device which use 12V DC power. You can use this battery to power our powerful wireless transmitter, CCTV camera and so on . Suitable for your need
Built-in ON/OFF switch to save power usage
Input voltage: 12.6V
Output voltage: 10.8~12.6 DC
Product life: Circulation charge and discharge ≥500 times