Here they are. We've worked with a manufacturer to upgrade 2 automatic injectors (squeeze cockers) with all food grade construction, medical grade silicon pick up tubes and stainless steel side port injector tips. Other injector tips are in the works. These units will cut your injection times in half or more and make it easier to get more even injection distribution at the same time.
We offer 2 models:
The 20ml Injector
Durable all metal construction (except for the barrel tube and pickup) and fully serviceable. Up to 20ml of injection with every squeeze. 1/4" draw tube and large check valves allow for injections with small particulates to pass through (depending on needle size). You can push a lot of fluid with this beast.
I did a lot of research and many of the disposable drenchers out there have a fiber material plunger backer which can harbor bacteria. This unit is constructed with a double silicone O ring system for a good seal with no contamination risk. I'll post a video of it in action shortly.
The 5ml Injector
Smaller, lighter, with a 5ml per squeeze capacity, this unit can still deliver a load of injection in a short period of time. This unit has a light plastic frame and is slightly smaller. Still 100% food grade materials including a silicone pick up tube. This injector will draw and push viscous injections such as Butcher's, Kosmo's, and FAB but due to the small check valves your injection must be particulate free.
Both injectors are in stock and shipping right now at the MABA store.
Any questions, fire away.