View Single Post
Old 03-17-2012, 05:38 PM   #85
is one Smokin' Farker

Join Date: 02-07-12
Location: Springfield, MO

Okay..So the women made us cut out day short (not much long after it started). One of us got drug around the mall and the other had to clean out his garage and rearrange EVERYTHING... We didn't get as far as we wanted but had to make sure you got fed a little for the weekend..We may have some mid-week progress to report until our next full weekend..We'll see.

This first shot is a close-up of the firebox door. You can probably guess which style we plan to go with for the inlets. The door looks a little rough around the edges, but we'll get it prettied up by the time it is finished.

This is just a shot of the stainless steel table top we are using for the business end of the chamber.

The next two pics are views of the inside where the box outlet meets the chamber. On the first pic, you can see that we are planning on placing the flanges on the inside of the chamber for a smooth, clean look (they aren't fastened yet). In the second pic, you can see that the chamber hole was cut larger than it needed to be; this was done to give us space to lay some welds down around the perimeter.

View from the left side.

Top shot.

The next two are just angle shots.

Dad next to the trailer for another size comparison.

There you have it guys. We'll try to get some more knocked out as soon as possible!
* XL [COLOR=seagreen]BGE[/COLOR] *Charbroil offset (cheapo) and a *[URL=""]project in the making 6' long x 28" diameter offset[/URL] [COLOR=red]<<<[/COLOR]Take a look!
ThatsWhatSheSaidBBQ is offline   Reply With Quote

Thanks from: --->