View Single Post
Unread 01-22-2012, 04:36 PM   #11
bbqchicken
is One Chatty Farker
 
Join Date: 07-23-11
Location: Pomona, Ca
Downloads: 1
Uploads: 0
Default

I guess it can be adapted for the performer

Q: Will the iQue 110 work with the
Weber One-Touch Gold or the Weber
Performer?
A: Yes! There are two ways to
accomplish this. The first method is to
remove the ash catcher hardware and
simply attach the Standard Manifold
and hi-temp tape strips to the kettle as
shown in the installation video. The ash
catcher hardware removes without
tools. In the second method the ash
catcher hardware is left on and a 1/2"
conduit hole (7/8" hole saw) is drilled in
the kettle down low and near the front
using the Standard Manifold's 1/4"
mounting hole as a hole location guide.
Remember to keep the air injection
point well below the level of the
charcoal grate. The Standard Manifold
toggle bolt is then placed through the
hole. The hi-temp tape is not used in
this case as the One-Touch vents are
kept closed. When the iQue is not in
use, the hose barb can be capped off
using the included Kill Plug. Installation
pictures can be seen on the "Weber
Gold and Performer Installation" page.
NOTE: The Performer Kettle has an
attachment for a propane bottle. The
propane bottle MUST be removed from
the kettle and stored in a safe location
while modifying the kettle and using
the iQue to regulate temperature
www.pitmasteriq.com/FAQs.html
__________________
UDS, Smokey Joe
bbqchicken is offline   Reply With Quote