Originally Posted by jfabernathy
Has anyone tested Stoke Master with Stoker Firmware version 220.127.116.11? I have noticed that both Stoke Master and StokerLog seem to have a polarity problem with the Fire pit alarm setting. If I use the web interface to set up my Fire pit alarm on the Stoker, and then view it with either Stoker Master or StokerLog it shows as not set. It I then set the fire pit alarm with either Stoker Master or StokerLog, it turns it off when viewed using the Web interface on the Stoker.
I haven't loaded that version of the firmware, so I'm not aware of any issues. I will try to get that firmware loaded and do some testing in the next week or so to see if this is an issue with StokeMaster or the firmware.
Until then, I would suggest backing down your firmare to 18.104.22.168
"At what point did we forget that the Space Shuttle was, essentially, a program that strapped human beings to an explosion and tried to stab through the sky with fire and math? How jaded do we have to be to lose collective interest in that?" - Robert Brockway