View Single Post
Old 08-22-2011, 02:11 PM   #6
is One Chatty Farker
NCGrimbo's Avatar
Join Date: 03-08-05
Location: Clayton, NC

Originally Posted by BMerrill View Post
Thanks for the reply...

I'll have to retry setting the WAN IP address.

Stoker software beta version has added a UI to access the socket command to change the PORT from 80.. this will allow those without a router that does port translation to have WAN access. but there are several other socket commands that would be beneficial for a user to access. They are:

Any possibility access to these could be incorporated in the app?
I have code in place to deal talk to the Stoker over socket since there are several functions there that I'd like to implement in future versions. But during testing, there were issues with some network bridges that were preventing the app from talking over the sockets, so I put a hold on that code. It will be implemented in a future version.
"At what point did we forget that the Space Shuttle was, essentially, a program that strapped human beings to an explosion and tried to stab through the sky with fire and math? How jaded do we have to be to lose collective interest in that?" - Robert Brockway
Weber 26.5"
Yoder YS640

NCGrimbo is online now