View Single Post
Unread 05-18-2011, 03:06 PM   #7950
dudg
Found some matches.
 
Join Date: 05-08-11
Location: Lake Crystal, MN
Downloads: 0
Uploads: 0
Default couple of questions

First of all I got a drum for my kiss UDS. The drum contained a water soluble coolant used for machine shop. I cut the top off and the inside has a black surface like a paint of sorts. I am able to cut right through it with a wire wheel down to bare metal. My concern is after I clean it up the steel surface is rough or porous its not smooth like some of the other drums I've seen. After burning all the paint off the outside with a weed burner the inside doesn't change much. Would this concern any of you and has anybody ever had any experience with this type of drum. My second question is my charcoal basket. I misread or misunderstood but I made a basket using a grate from a 22.5 grill so it is approx 18 inch diameter. Is this wide of a basket a good or bad thing. Thanks
dudg is offline   Reply With Quote