View Single Post
Unread 03-09-2011, 12:49 AM   #7569
chobint
On the road to being a farker
 
Join Date: 02-27-10
Location: Columbus, OH
Downloads: 0
Uploads: 0
Default

The chisel technique is most often used to cut out the flat metal inside of the top lip. From what I've seen, most recommend a large chisel (I used a mason's chisel). The process of cutting is fairly straight forward. You just whack the chisel into the top at an angle, and continue driving it at an angle as you push the chisel around the interior of the drum. If you use a sledge hammer and a proper chisel, the job should take no more than 15 minutes even for your first try. I let my mom give it a try b/c she wanted to. Altho she was much slower due to sheer power output, she probably did 25% to my 75% of the cutting. Not bad for an old lady. Anyway, the point of the anecdote is to emphasize how easy it is to cut the inside out with a chisel.
chobint is offline   Reply With Quote