View Single Post
Unread 09-17-2010, 08:02 AM   #1
BigButzBBQ
is One Chatty Farker

 
BigButzBBQ's Avatar
 
Join Date: 03-16-10
Location: Northwestern Wisconsin
Downloads: 0
Uploads: 0
Talking Daddy's girl gets a mUDS

The argument shall come up continually, did I build it for her or for myself, truth is it's probably a mix of both. Either way, we're both happy.

My oldest has been wanting to help with the grills and smokers more recently. She asked if she could have a little grill of her own, my response was that we already had a little grill but we could use it some more if she wanted to help grill more. She was very excited about this and helped with the stuffed chicken thighs I did a while back. After that, I was using a UDS and she asked if there are smokers her size. I told her that we could build her a mini UDS some day. Would just need to find a small drum and some parts.
That was all she needed to hear. The next weekend she was helping her grandpa fix something and told him, "Dad's going to build me a smoker my size but says he needs a little drum and pieces. Do you have a little drum grandpa?" When I got home, that night, there were two small drums sitting outside of his shed, here he already had a couple of them. I picked out the cleaner of the 2.

All that was left was to find a lid and some grates, I figured I would have to really scrounge or buy the other parts. The next day we were at a giant rummage sale, yeah, you probably guessed it, there was a baby sunbeam type grill, the bottom was rusted out so, I talked the guy down to $0.50 for it. All that was left was a stop at the hardware store and some time to work on the little thing.
I decided that this would be a good oportunity to build my first no-weld UDS being as my welder (FIL) has been rather busy lately and mainly because I wanted to see if I could do it. So, I drilled out my vent holes first.

Then came the burn out process. This drum had Mobile Lubricant in it at some point so, it was required.

This lasted well into the night.

Then came time to put in the hardware and paint. I used 3/4" pipe this time around and locked it in place with conduit nuts. For the rack supports I used 2" long bolts with one that was left to slide out on the top shelf, so as to allow for a second shelf to be put in. Without this removable one, a second shelf insert would be nearly impossible. From there it was onto paint. Classic stove black base.

I'll have to post some internal pics when I get a chance to take them but, the charcoal rack consists of a charcoal grate for a small Weber with 4 4" long 3/8" carriage bolts holding it up off of a 9" pie pan and, to hold the charcoal I'm currently using an old coffee can that I cut the bottom off of and then burned thuroughly in a fire for 2 hours. This set up works pretty good but, I've actually found that I have to pick up and place each piece of hot coal inside with a pair of tongs due to a chimney dump being impossible but, it only takes about 4-6 pieces to get it going. I have yet to install a permanent thermometer and and right now am just dropping one down through the top vent. I got a little carried away with the paint being as this was a kind of camping project for me but, my daughter really likes it.

We seasoned her up with some scotch eggs and 2 fatties for breakfast followed up by some brawts wrapped in bacon for lunch and then some steaks for dinner.
My daughter is so proud to have her own smoker and tells everyone about it even though, she gets easily distracted and I end up doing most of the cooking on it thus far. I must say that I have been rather impressed with this little ones performance thus far and when I fired up one of my regular UDSs the other day, it fealt like I had the whole world to cook on after playing in miniature for the last couple of days.
Here she is with her older siblings. I think she is more than a welcome addition to "the family".

Thanks for looking.
__________________
Some call me... Tom...?

12" Charbroil, SJS, WGA, 22.5 OTG, mUDS, 2 UDS w/AML Wood Art Custom Handles, Pull behind rig , & 1 new rig being built from 500lb tank.

Inventor of: 3BGB! , Shigen! , & Bacone Scotch Egg Sundae!
Avatar by Zydecopaws
Big Butz BBQ Products
BigButzBBQ is offline   Reply With Quote


Thanks from: --->