Didn't get as much done today as I wanted. Last minute work came in this morning (Gotta make that $$$$). Anyways started on the build this evening by grinding down the stubs that were left from removing the legs. I then marked out the doors a bit differently by having a big and a small door. I also raised the bottom edge of the doors up just over an inch and started cutting the top edge. (No fireworks... I'm still here guys!) Once the top line of the door was cut I welded one set of hinges to the right hand door. It was getting pretty dark by then so I called it a day. Here are some pics: Haven't welded in over a year... A bit "rusty" to say the least... no pun intended. Cuts came out pretty straight though. Happy with that. Tomorrow should be a bit more productive, planning to finish cutting out the doors and weld back on the legs.