Originally Posted by Smokin Turkey
very cool! i'm anxious to see how your water coil works for you as I am designing one to go on the trailer build I am assembling now. Where did you place it?
I actually hung it from the bottom of our smoke baffle. I wrapped the copper around our exhaust pipe (6") to form the coil. It is situated so that the smoke can blow through the "hole" in the middle of the water coil. I plan on putting a ball valve on the inlet side so that I can shutoff the water to the coil if it is not being used for awhile. I also plan on putting a tee on the outlet side with a T&P valve from a water heater in the end of the tee for safety(the T&P would open on either 210 degrees or 30 PSI). The tee side of the tee would go to my hot water side of the faucet. I am very anxious to see how it works as well and will keep you posted!