View Single Post
Unread 11-30-2009, 06:08 AM   #1
puddle jumper
Got Wood.
 
puddle jumper's Avatar
 
Join Date: 06-04-08
Location: Calhoun, Ga
Downloads: 0
Uploads: 0
Wink My War Wagon Build " Pic heavy "

OK Guys here we go,,
This is the beginning of the War Wagon that I mentioned in my intro, its going to be a reverced flow with a rib box over the fire box, going to have a gas burner fryer mounted on the side of the grill, also a burner eye for doing low country boiles , all mounter on a traler for camping and such, sorry about the grade school drawing in the idea pic but when I get a idea in my head helps to put some thing on paper to think about,,, I tried to look at a bunch of grills on line and pieced the features that I liked about each one and put them into mine,,

I had built an offset a couple of years ago that the fire box was to small on so that is where I started, made the fire box much larger and then added a rib box on "or anything else I want to throw in it", the fryer can be removed so it can be taken with me if im not going to need the whole trailer,Im to the point of adding the doors on the fryer and rib box and then going to start the trailer, the whole grill is made from 1/4 to 1/2 " steel, I work in a steel mill here in Ga so I can get scrap steel at a really good price, I figure that I will have in the neighborhood of 400 in it when its done,,
Im still up in the air about adding a water bowl on the baffle plate in the main smoker...
http://www.bbq-brethren.com/forum/sh...ad.php?t=73127

Im open for comments, suggestions, and questions,,
Puddle
Attached Images
File Type: jpg the idea.JPG (42.6 KB, 1398 views)
File Type: jpg 1 start of mods.JPG (99.7 KB, 1386 views)
File Type: jpg 2 new rib box.JPG (115.5 KB, 1379 views)
File Type: jpg 3 fire box vent.JPG (79.1 KB, 1373 views)
File Type: jpg 4 rib box on.JPG (68.7 KB, 1370 views)
File Type: jpg 5 regulat heat in the rib box.JPG (70.1 KB, 1366 views)
File Type: jpg 6 baffle for heat comming out f fire box.JPG (69.6 KB, 1365 views)
File Type: jpg 7 fryer clone.JPG (106.3 KB, 1366 views)
File Type: jpg 8 heat element.JPG (75.7 KB, 1366 views)
File Type: jpg 9 fryer mount removable so can be used seperet.JPG (82.5 KB, 1369 views)
File Type: jpg grill in the making for the war wagon.JPG (164.8 KB, 1376 views)
__________________
Equip= Custom Reverse Flow, Brinkman Bullet, Custom Two Basket Gas Fryer, Bayue Classic Fryer.
puddle jumper is offline   Reply With Quote