View Single Post
Unread 08-26-2009, 10:42 AM   #3954
Babyboomerboy
is one Smokin' Farker

 
Babyboomerboy's Avatar
 
Join Date: 10-28-08
Location: Yates Center, Kansas
Downloads: 0
Uploads: 0
Default

Quote:
Originally Posted by jswordy View Post
We did this with one we just about have finished. We left the metal stick up 1/2" and it works fine with a Uniflame knockoff lid.

We are building another one with a Weber lid that also does not fit, and contemplating flattening the lid rim and wrapping the steel around the lid this time, rather than tacking it inside the drum. Working theory is that it would control wind effects better that way.

The steel is tack-welded in, and then the seam is sealed with JB Weld.
That is how I did my Weber lid and its works great. I also tack welded it and filled the cracks with JB Weld

Last edited by Babyboomerboy; 10-27-2012 at 08:47 AM..
Babyboomerboy is offline   Reply With Quote