The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (http://www.bbq-brethren.com/forum/index.php)
-   Q-talk (http://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   Firebox Baffles Open or Sealed ? (http://www.bbq-brethren.com/forum/showthread.php?t=25949)

Meat Burner 04-08-2007 03:39 PM

Firebox Baffles Open or Sealed ?
 
1 Attachment(s)
Here is a firebox we tac welded to experiment. The left baffle will be permanent and the right will be adjustable. What are your thoughts on boxing the open ends of the baffles, or should they remain open as they are now? Thanks for any ideas!!!!!

smokinbadger 04-08-2007 03:44 PM

Quote:

Originally Posted by Meat Burner (Post 376714)
Here is a firebox we tac welded to experiment. The left baffle will be permanent and the right will be adjustable. What are your thoughts on boxing the open ends of the baffles, or should they remain open as they are now? Thanks for any ideas!!!!!

It should be slightly better for the ends not to be connected, to prevent a heat conduction path and subsequent short circuiting of the flame front across the baffles.

Meat Burner 04-08-2007 03:50 PM

Quote:

Originally Posted by smokinbadger (Post 376717)
It should be slightly better for the ends not to be connected, to prevent a heat conduction path and subsequent short circuiting of the flame front across the baffles.

Most of them I see are open. I was curious as to why because I simply don't know. That makes sence. Thanks.

Brauma 04-08-2007 03:55 PM

I wouldnt think it will make that much difference. Maybe the ones you see built from other sources took a long piece of metal and bent it into a U.

Meat Burner 04-08-2007 06:14 PM

Great...that makes sense as well. What is a Q'er to do? COOK SOMETHING!

JohnMcD348 04-08-2007 09:19 PM

Maybe Spice will chime in on this. I have one of his baskets for my BSKD and it has two completely removable baffles that are solid across with an air gap built into each one. I don't have a problem with the slow ignition of the coals and with them being removable, I can pull them out and rake the coals to the front of the firebasket, reinstall the baffles and refill with unlit charcoal and chunks.

Meat Burner 04-08-2007 09:26 PM

Didn't know what I was doing so just started playing around with the firebasket. I would now buy Spice's basket since they have already done the engineering and set up to fab it. It always looks too expensive until you try to do it yourself...I'm not too smart.

Bentley 04-08-2007 10:01 PM

Quote:

Originally Posted by Meat Burner (Post 376714)
Here is a firebox we tac welded to experiment. The left baffle will be permanent and the right will be adjustable. What are your thoughts on boxing the open ends of the baffles, or should they remain open as they are now? Thanks for any ideas!!!!!

Dayum...that is some pretty welding! Makes me embarresed to have Neil post photos of my crap!


All times are GMT -5. The time now is 09:33 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
2003 -2012 BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.