The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (http://www.bbq-brethren.com/forum/index.php)
-   Q-talk (http://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   Pit by TQ(TuscaloosaQ) review, also basket by Yokeup (http://www.bbq-brethren.com/forum/showthread.php?t=174590)

RX2006JE 11-04-2013 11:51 AM

Pit by TQ(TuscaloosaQ) review, also basket by Yokeup
 
So I have had some work done by TQ and have shown the transformations here on the forum in other places, but have not done a review on the performance of the pit. ***Just to be clear the original pit was built by another builder and had a shoddy frame and a very thin firebox in which Paul fixed both of those problems, but the cook chamber is still original not built by TQ, FYI his are built much better.***Friday I was asked to cook for my son's church camp out, did the same cook last year too. Well I started the pit at 10AM with 20lbs of charcoal that I put in the XXLbasket that I had Jeff (yokeup) make for me last year. I start that up with my torch and let it go until it gets to 300deg. and then let the stoker take over. I know the stoker is overkill, you don't need it on offset, learn how to manage a fire, and the rest of the arguments, but it makes comp life easier for me so I do it. Anyway after about 20 to 25min the smoker is up to temp.http://www.bbq-brethren.com/forum/<a...psf3e5a4ba.jpg Recently TQ put on a new double insulated firebox and warmer on my smoker and the trailer that he built for me. I will say that I have cooked on this thing several times since bringing it home and wow what a difference it has made. Getting to and maintaining temps are a breeze with it, with and without the stoker. The other day I re seasoned it after a clean out and just loaded it up with charcoal and and let it run and for 4+ hours on 20lbs of charcoal it held 300deg without the stoker and after 6 hours it was still holding at around 230 to 240. Fuel consumption has been significantly reduced since putting in the insulated box and using the XXL Basket from Jeff. The cooker is built like a tank and pulls like a dream. If you are at all interested in a custom quality pit and an excellent person to work with give Paul (TQ) a shout. He was always upfront about cost and time frames and the quality of work is second to none. Anyway here are a couple of pics of the pit in action. I cooked 12 slabs of spares and a 12lb brisket. You can also see on the pic of the thermometer that Paul put in a grommet for my probes to run through so that they wont get pinched in the doors anymore.

Thermo and grommet
http://i558.photobucket.com/albums/s...psf3e5a4ba.jpg

Trailer Pic
http://i558.photobucket.com/albums/s...ps94201684.jpg

Double insulated firebox and door with warmer
http://i558.photobucket.com/albums/s...psa4140a32.jpg

XXL Basket in action with Stoker air pipe underneath
http://i558.photobucket.com/albums/s...ps9a8be2c9.jpg

Stoker Fan piped in through the back of firebox
http://i558.photobucket.com/albums/s...psc301d1a2.jpg

Brisket Pic (sorry didn't get pics of the ribs)
http://i558.photobucket.com/albums/s...psaea99cb9.jpg

shagnasty 11-04-2013 11:57 AM

nice looking rig.

sassage 11-04-2013 12:41 PM

Looks great...gonna have to get with TQ one of these days

sliding_billy 11-04-2013 12:57 PM

Very nice!

TuscaloosaQ 11-04-2013 01:27 PM

Thx Johnny but to clarify I did not build the cook chamber, I cut his old undersized and thin firebox off built him a new trailer, and added an insulated firebox and warmer to the rig. I know who built the orginial rig but my lips are sealed!!!!! Again thx Johnny!!!!

RX2006JE 11-04-2013 02:26 PM

Quote:

Originally Posted by TuscaloosaQ (Post 2681085)
Thx Johnny but to clarify I did not build the cook chamber, I cut his old undersized and thin firebox off built him a new trailer, and added an insulated firebox and warmer to the rig. I know who built the orginial rig but my lips are sealed!!!!! Again thx Johnny!!!!

corrected that in my description, meant to do that. don't want to misrepresent the quality work that you do.


All times are GMT -5. The time now is 08:25 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.