The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (http://www.bbq-brethren.com/forum/index.php)
-   Q-talk (http://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   Injector Needle Size? (http://www.bbq-brethren.com/forum/showthread.php?t=171523)

Hoosier1960 09-21-2013 06:53 AM

Injector Needle Size?
 
I have one of the Proshot injectors I got at Rural King. The only problem I have is that when I try to inject anything except for straight apple juice or broth it clogs up. What size needle do I need and best place to get them? It uses a Luer Lock tip. Thanks!

IamMadMan 09-21-2013 07:49 AM

to prevent clogs strain the liquid with a coffee filter before filling the injector.

A thin piece if wire pushed through the tip will unclog it.

Try a farm supply store

or try here http://www.texastastes.com/p1032.htm

ssbbqguy 09-21-2013 01:23 PM

Using a coffee or similar type will lose too much good stuff. We always grind the rubs and spices we use to inject and use a couple different size strainers to catch clogging sized pieces. The cheap sink strainers work wonders. I use very small (1/8" or smaller ) needles, so it's something we deal with every cook. Steve.

Hoosier1960 09-22-2013 09:21 AM

Thank you both. SSBBBQGUY, do you use a coffee grinder or?


All times are GMT -5. The time now is 09:17 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.