I am looking at putting a temp control system on my 22.5 WSM. I have researched the BBQ Guru. What other options are available for this purpose. I want to make sure I research everything before I buy one. Are any of the units water proof?
08-25-2013 09:29 AM
I have one of these, not on a WSM but a similar smoker)
I have used the Stoker System since 2007. I can control all three of my WSMs with one controller and from anywhere I am using the Wifi compatibility (if I wanted to).
08-25-2013 09:35 AM
Digiq dx 2 here. No complaints at all.
08-25-2013 10:17 AM
If my set point is going to always be between 225 and 300 degrees am I better off with the 10 CFM fan or should I go with the 25 CFM. I see the Rocks Stoker recommends the 25CFM and the GURU recommends the 10CFM.
08-25-2013 10:22 AM
10 cfm is all you need with the wsm.
08-25-2013 10:27 AM
I have a DigiQ Guru II w/ 25 CFM since 2007....
larger fan was for a different cooker... but it works fine for WSM too.. However 10 CFM is all that would be needed. I keep 25 CFM open only 1/4 open..
Guru has been rock solid for 6 years.
08-25-2013 10:52 AM
I have both BBQ Guru and a PitmasterIQ , both are great but for price point and having it all in one unit it's the PitmasterIQ 110 hands down. They have a new Pitmasteriq 120 i'd love to get eventually.
08-25-2013 12:34 PM
depends on what you want to spend, i have the iq110 and it has been working great
08-25-2013 12:42 PM
I have always used a Stoker with 5 cfm fan on my WSM and it works great. I also use the 5 cfm on my Superior SS-2.
08-25-2013 12:55 PM
You will find a lot of good choices represented here. I use an iQue 110, and am very happy with it. I hang it under my work table to protect it from sun and rain. That is one of the nice things about having the fan unit and controller all in one box with a hose to the cooker.