The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (http://www.bbq-brethren.com/forum/index.php)
-   Q-talk (http://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   Who has built a Weber cart? (http://www.bbq-brethren.com/forum/showthread.php?t=164472)

TBergMania 06-27-2013 11:44 PM

Who has built a Weber cart?
 
I'm looking to find a Weber OTG, then build a Performer style cart for it. I'm mostly looking to see how you guys have isolated the kettle from the cart or just examples of your carts.

Pappy 06-28-2013 06:00 AM

I made this one a while back. Doesn't have a large table like a performer cart.

http://www.bbq-brethren.com/forum/sh...d.php?t=132428

Thin Blue 06-28-2013 06:27 AM

When I was more active on the site awhile back, I built this. It was ugly as heck, but very functional. May be good to get some inspiration from...

http://www.bbq-brethren.com/forum/sh...ad.php?t=41895

dadsr4 06-28-2013 08:46 AM

I've used conduit clips to hold kettle lips several times. The hook goes under the lip, the hole is used to fasten it to a cart.
http://i1193.photobucket.com/albums/...uit20Clamp.jpg
Currently, I am using wire bent into a similar shape on this one made from a Gap shelving unit.
http://i1193.photobucket.com/albums/...adsr4/Cart.jpg

BigBlock 06-28-2013 12:50 PM

this is what we built
http://i1166.photobucket.com/albums/...AWG/table1.jpg

http://i1166.photobucket.com/albums/...AWG/table3.jpg

http://i1166.photobucket.com/albums/...AWG/table2.jpg

http://i1166.photobucket.com/albums/...HAWG/bobs8.jpg

I love my table

cirk 06-28-2013 02:37 PM

Weber sells an add on table on amazon if you don't want to build one.

McGurk 06-28-2013 02:39 PM

I built this a few years ago. It's a SS front door from an upright commercial freezer, built on a table made of redwood. I just cut out a hole and left 8 half inch tabs around the inside. I then bent them up and they fit into the gap of the rolled-over rim in the bottom section of the kettle. That way the lid is able to completely close on the rim without touching the table.

http://img97.imageshack.us/img97/3875/webertable12.jpg

http://img190.imageshack.us/img190/6...bertable13.jpg

Carbon 06-28-2013 02:53 PM

I built this table a few years ago but took it apart after a couple of years of use to make space for a pizza oven in that corner.
Now that I have a small welder I'm thinking about putting together an all metal portable cart for that same OTG.

http://i31.photobucket.com/albums/c3...Q/P1030647.jpg

Bluebird 06-28-2013 03:27 PM

Very Nice!!

sigpi906 06-28-2013 03:33 PM

Quote:

Originally Posted by Carbon (Post 2532551)
I built this table a few years ago but took it apart after a couple of years of use to make space for a pizza oven in that corner.
Now that I have a small welder I'm thinking about putting together an all metal portable cart for that same OTG.

http://i31.photobucket.com/albums/c3...Q/P1030647.jpg

Tell me a little bit about that table top, please. That looks pretty nice, brother.

dadsr4 06-28-2013 03:49 PM

Here is a photo of the bent wires I mentioned.
http://i1193.photobucket.com/albums/...psf7885c94.jpg

Carbon 06-28-2013 03:55 PM

Quote:

Originally Posted by sigpi906 (Post 2532581)
Tell me a little bit about that table top, please. That looks pretty nice, brother.

The table top is broken chunks of marble over cement board.

kylefisk 06-28-2013 06:04 PM

I like the blue otg. I've been thinking about building a replacement for my performer. The plastic parts that hold the bottom rack together don't hold up. Nice job

harris92 06-28-2013 08:17 PM

Didn't build it but it serves its purpose....


All times are GMT -5. The time now is 02:43 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.