The BBQ BRETHREN FORUMS.
Page 1 of 6 1 23456
Show 50 post(s) from this thread on one page

The BBQ BRETHREN FORUMS. (http://www.bbq-brethren.com/forum/index.php)
-   Q-talk (http://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   Pizza Oven and BBQ Build Thread (http://www.bbq-brethren.com/forum/showthread.php?t=153650)

Thermal Mass 02-11-2013 05:09 PM
Pizza Oven and BBQ Build Thread
 
4 Attachment(s)
After a few requests, here is the build so far...
There are many details really to list, so ask away!
First we started with some working & drinking shade.
Block stand, dry stacked and filled with rebar and concrete.
Reinforced concrete base form.
Base curing.

Thermal Mass 02-11-2013 05:18 PM
Insulating concrete and fire brick floor
 
3 Attachment(s)
Form for the insulating concrete (pearlite and mortar 8:1)
Insulating base poured.
Fire brick set in a herringbone pattern with 1" of fire mortar (for true leveling and rigidity) between the brick and insulating concrete.
As you will see later, the dome is built on top of the floor.

Thermal Mass 02-11-2013 05:25 PM
Beginnning dome and opening
 
4 Attachment(s)
Starting the dome and opening with form
More dome courses.
Supporting as we go...

VoodoChild 02-11-2013 05:37 PM
WOW :shocked:

Carbon 02-11-2013 05:49 PM
Nice......Ahh, I see the "Indispensable Tool" in use. :) I used one on my build too.

dwfisk 02-11-2013 05:50 PM
Thank You, Thank You, Thank You! gonna build me one of these!!!

davefan360 02-11-2013 05:54 PM
looks sweet so far. is the opening under the oven for wood?

PaPaQ 02-11-2013 05:56 PM
Looks Good!

KotaChuk678 02-11-2013 06:18 PM
Some massive project there..Nice! :clap:

jsperk 02-11-2013 06:24 PM
Wow, that's going to be awesome.

V-wiz 02-11-2013 06:29 PM
Very nice, nice to see another member build an oven. You sure did get alot of work done in one day :). You should have used the indispensable tool or built a form. That is a pretty long landing?

Bonewagon 02-11-2013 06:35 PM
That's awesome! :clap: Can't wait to see the finished pics.

cholloway 02-11-2013 07:05 PM
Quite an undertaking. Looks awesome!

Carbon 02-11-2013 07:15 PM
Quote:
Originally Posted by V-wiz (Post 2364142)
Very nice, nice to see another member build an oven. You should have used the indispensable tool or built a form.
I believe he did use the I-Tool up to a point where the upper courses started to form a tear drop shape. You can see the I-Tool in one photo. The use of this tool kinda gets iffy as you get up higher as the dome starts closing in...

RevZiLLa 02-12-2013 12:26 AM
You can be proud of that!


All times are GMT -5. The time now is 12:01 AM.
Page 1 of 6 1 23456
Show 50 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.