The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (http://www.bbq-brethren.com/forum/index.php)
-   Q-talk (http://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   Name of probe outlet piece on UDS (http://www.bbq-brethren.com/forum/showthread.php?t=153596)

Toronto 02-11-2013 12:41 AM

Name of probe outlet piece on UDS
 
As the title suggest, I am looking for the name of the electrical conduit piece that people use on their UDS for a probe outlet.

Boudreaux 02-11-2013 12:57 AM

I don't have a UDS, but I installed a brass (1/2" length) nipple (lamps accessory) piece with two brass knurls on my WSM 22.5. Drilled a hole 1/2" and everything fit very well. the parts came from Home depot in the Lamp repair area. I need a brass cap that will fit the piece.... The two probes of my Maverick ET732 fit well together, passing them in the hole one at a time......

JMSetzler 02-11-2013 01:06 AM

https://dl.dropbox.com/u/3402440/pic...isc/probes.jpg

I have one around here in the packaging if i can find it...

mytmouz 02-11-2013 01:12 AM

cord connector

R2Egg2Q 02-11-2013 01:15 AM

I think you're referring to these: http://www.bbq-brethren.com/forum/sh....php?p=2249897

JMSetzler 02-11-2013 01:15 AM

The one in my picture is from the electrical aisle at Lowes and it's called something like "NP/V Conduit Connector" or something close... the lock washer was extra, but the two combined were about $4.

Toronto 02-11-2013 01:19 AM

Exactly the info I needed, much appreciated.


All times are GMT -5. The time now is 03:54 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.